LED Explosion proof lighting, D, CI D1, 150W, 21,000 Lum., 5000K, 750W HID repl.

Description

D Series CI D1 150 Watt, 20,250 Lumen, 5000K, 100 - 277V, is a completely Explosion proof LED fixture, it is certified to be used in extreme locations, for example;
Class I locations are defined as having flammable gases or vapors are, or may be present in the air in quantities sufficient to produce explosive or ignitable conditions.
Class I locations are further subdivided into two Divisions and three Zones.
Class I, Division 1:
There are three different situations that could exist to classify an area as a Class I, Division 1 location:
1.
Ignitable concentrations of flammable gases or vapors may exist under normal operating conditions.
2.
Ignitable concentrations of such gases or vapors may exist frequently because of repair or maintenance operations or because of leakage.
3.
Breakdown or faulty operation of equipment or processes might release ignitable concentrations of flammable gases or vapors, and might also cause simultaneous failure of electric equipment.
It easily replaces a 750W HID fixture.
D Series Explosion proof LED fixture is designed for installations where moisture, dirt, dust, corrosion and vibration may be present, or areas where wind, water, snow or high ambient temperatures can be expected, or where gas concentrations could be highly explosive.
The Hazardous Location lighting fixture is designed to be used in locations made
hazardous
by the presence of flammable vapors or gases or combustible dusts as defined by the NEC and IEC.
C Series Explosion proof LED fixture / Hazardous Location lighting fixture is ideal for replacing existing HPS/MH, offering higher efficacy for increased energy savings, lower maintenance costs and shorter paybacks.
This indoor/ outdoor Explosion proof LED fixture offer energy savings up to 70% and eliminates maintenance for years to come.
The Explosion proof LED fixture is available in 5000K:
Hazardous Location Lighting / Explosion Proof LED fixture 60W - 150W C1 D1 Series C Specs:
Only Non-dimmable are stocked!
• NEMA 4X, IP66
• UL1598/UL1589A/UL844
• CSA C22.2 No. 137/No.250.0
Class I, Division 1, Groups C,D
Class I, Division 2, Groups A,
B
,C,D
Class II, Division 2, Groups E,F,G
Class III
• IECEX
• ATEX
• L70 50,000 hours
15.7 W x 10" H (with extended bracket) x 11.3" W, weight 44 pounds/ea
Color Temperature 3000K to 6500K,
Note! 5000K stock
CRI > 80
Beam Angle 120º
Operation Temperature -40ºC to 60ºC
Efficiency More than 140 LPW, 20,250 Lumen
Input Voltage AC100-277V/ 200-480V,
Note! 100 - 277V stock
Frequency 50-60Hz
Power Factor More than 0.90
Rated Life 150,000 hours
LED Type Cree LED Chips
5 Year Warranty
Our price is around 0/ea less compared to similar explosion proof CI D1 LED fixtures!
Please make sure that any explosion proof LED fixture you buy has the necessary documentation, see above.
Some are selling non-certified LED fixtures as explosion proof, this can be VERY dangerous!
We have usually 10 - 25 units available. If more than one is needed, please contact us.
Price discount is available for quantities over 5 units.
Please note!
If fixtures are returned for any reason other than a Warranty issue, we will deduct the freight cost to the customer from the refund, usually around /each.