MUD-SKIPPER® EASY Long Tail Mud Motor Kit 8-16hp - 2 Piece Shaft

Description

MUD-SKIPPER® EASY Long Tail Mud Motor Kit 8-16hp - 2 Piece Shaft
NEW CHANGES TO THIS KIT - PTO HOUSING AND TILLER HANDLE ARE NOW ALL BLACK   Introducing the Mud-Skipper 8-16HP EASY K1 Long Tail Motor Drive System   The Kit Includes:   110" Long Shaft and Nylon Greaseless Prop Bushing - with 5 Taiken Shaft bushings EASY K1 Shaft is TWO PIECE PTO Housing with Hardened "T" Style Wing Bolts PTO Inner Shaft with Grade 5 Steel Bolts AND Key for Engine Mounting Redesigned 4" Deep Transom Mount Clamp with hardened "T" Style Wing Bolts. Also, see our Transom Pad Kit! Engine Mount Base with Grade 5 Nuts & Bolts Adjustable Tiller Handle - Now powder coated black! 2 Propellers - 7.5" & 8" Diameter. Throttle Cable & Lever Push Button & Tethered Safety Kill Switch The Patented EASY K1 Shaft is separates into two pieces making transport easier and makes shipping to you less expensive at the same time. 2 piece shaft kits have an extra bushing for smooth running - we guarantee it!   Newly Designed Transom Mount - Reinforced "T" Style Wing Bolts & Grease Zerk Fitting. Transom Mount is 4" Deep (A Full Inch Deeper Than The Competition)   The Engine Mount The four bolt holes fit most engine bases from 8hp to 16hp Note the post on the engine base. This fits into the tube on the transom mount, allowing the engine to swivel in all directions     The PTO Shaft Connector The 1" diameter PTO shaft fits over the engine's crank and the long tail slots into it on the reverse end. Includes both screw and key mechanisms to lock into place. The Drive Housing The housing is bolted over the engine's drive shaft All engines have the four bolt hole configuration. This kit utilizes a 5" Bolt Circle Please add the Mud-skipper 9hp or 16hp Electric Start engine to your cart for an additional cost and we will ship everything you need to get right on the water! The kit also fits the following 1" Horizontal, Keyed Shaft Motors: The Harbor Freight 420cc Horizontal Output Shaft Honda G300-400, GX-240, 270, 340, 390 Honda 11hp GX340 models: GX340UT2QA2, GX340UT2QNE2 Honda 13hp GX390 models: GX390UT2QAA2, GX390UT1QNE2, GX390UT2QXC9 & DUCAR 13hp (which is a Honda GX390 clone) CARROL STREAM COMPANY 11hp, 13hp, 16hp MAXTOOLS 16HP Duromax   The Throttle Linkage Connections   Engine Requirements 1" Keyed, Horizontal Drive Shaft with 5" Bolt Circle (Holes 3.5" x 3.5" in a square) Engine Mounting Bolt Holes - 3.75" x 7.6875"   Kill Switch Installation What our customers are saying: Clint F -- "I want to say I'm glad I didn't believe the hype and go with the s*s company although I'm from Florida, now in Texas. I purchased your longtail 7 hp kit and although I customized it it's awesome. No one has ever seen the like round here. I'm a commercial fisherman and I use this motor to collect and sell marsh baits. Thank you mudskipper for saving me $$." Jeff C - "Just purchased your long tail mud motor and love it. I will be ordering the z bent steering arm for it soon. I stand while operating the boat and it will make the motor complete. Thanks again guys good job"             Limited Two Year Warranty: If, within TWO years from the date of purchase your longtail mud-motor kit fails due to a defect in materials, or workmanship, we will repair or replace, at our discretion, any part that we determine to be defective in materials or workmanship, free of charge. If the product fails, the buyer must contact Mud-Skipper for an RMA prior to returning the product. Failed parts must be returned for inspection. Shipping expenses for any item submitted for repair or replacement under this warranty are the responsibility of the owner of the item. Mud-Skipper will provide return shipping of the repaired or replaced part to the customer via UPS, USPS parcel post, or other freight carrier of our choice (additional charges for expedited return shipping to the buyer is the responsibility of the buyer). This warranty does not cover damage due to impact, normal wear, excessive wear to the shaft or shaft bushings due to lack of lubrication, neglect, corrosion, lack of maintenance, modification to the product, or misuse. The customer will be responsible for the shipping costs of any item returned to them that is not covered under warranty. This warranty is provided to the original purchaser. Proof of original purchase is required on all warranties, exchanges, and returns. Electrical parts ARE covered under this warranty. Propellers ARE NOT covered under this warranty.
MUD-SKIPPER® EASY Long Tail Mud Motor Kit 8-16hp - 2 Piece Shaft
NEW CHANGES TO THIS KIT - PTO HOUSING AND TILLER HANDLE ARE NOW ALL BLACK
Introducing the Mud-Skipper 8-16HP EASY K1 Long Tail Motor Drive System
The Kit Includes:
110" Long Shaft and Nylon Greaseless Prop Bushing - with 5
Taiken Shaft bushings
EASY K1 Shaft is
TWO PIECE
PTO Housing with Hardened "T" Style Wing Bolts
PTO Inner Shaft with Grade 5 Steel Bolts AND Key for Engine Mounting
Redesigned 4" Deep Transom Mount Clamp with hardened "T" Style Wing Bolts. Also, see our
Transom Pad Kit
!
Engine Mount Base with Grade 5 Nuts & Bolts
Adjustable Tiller Handle - Now powder coated black!
2 Propellers - 7.5" & 8" Diameter.
Throttle Cable & Lever
Push Button & Tethered Safety Kill Switch
The Patented EASY K1 Shaft is separates into two pieces making transport easier and makes shipping to you less expensive at the same time. 2 piece shaft kits have an extra bushing for smooth running - we guarantee it!
Newly Designed Transom Mount - Reinforced "T" Style Wing Bolts & Grease Zerk Fitting. Transom Mount is 4" Deep (A Full Inch Deeper Than The Competition)
The Engine Mount
The four bolt holes fit most engine bases from 8hp to 16hp
Note the post on the engine base. This fits into the tube on the transom mount, allowing the engine to swivel in all directions
The PTO Shaft Connector
The 1" diameter PTO shaft fits over the engine's crank and the long tail slots into it on the reverse end. Includes both screw and key mechanisms to lock into place.
The Drive Housing
The housing is bolted over the engine's drive shaft
All engines have the four bolt hole configuration. This kit utilizes a 5" Bolt Circle
Please add the Mud-skipper 9hp or 16hp Electric Start engine to your cart for an additional cost and we will ship everything you need to get right on the water! The kit also fits the following 1" Horizontal, Keyed Shaft Motors:
The Harbor Freight 420cc Horizontal Output Shaft
Honda G300-400, GX-240, 270, 340, 390
Honda 11hp GX340 models: GX340UT2QA2, GX340UT2QNE2
Honda 13hp GX390 models: GX390UT2QAA2, GX390UT1QNE2, GX390UT2QXC9 & DUCAR 13hp (which is a Honda GX390 clone)
CARROL STREAM COMPANY 11hp, 13hp, 16hp
MAXTOOLS 16HP Duromax
The Throttle Linkage Connections
Engine Requirements
1" Keyed, Horizontal Drive Shaft with 5" Bolt Circle (Holes 3.5" x 3.5" in a square)
Engine Mounting Bolt Holes - 3.75" x 7.6875"
Kill Switch Installation
What our customers are saying:
Clint F
-- "I want to say I'm glad I didn't believe the hype and go with the s*s company although I'm from Florida, now in Texas.
I purchased your longtail 7 hp kit and although I customized it it's awesome.
No one has ever seen the like round here. I'm a commercial fisherman and I use this motor to collect and sell marsh baits.
Thank you mudskipper for saving me $$$."
Jeff C
- "Just purchased your long tail mud motor and love it. I will be ordering the z bent steering arm for it soon. I stand while operating the boat and it will make the motor complete. Thanks again guys good job"
Limited Two Year Warranty:
If, within TWO years from the date of purchase your longtail mud-motor kit fails due to a defect in materials, or workmanship, we will repair or replace, at our discretion, any part that we determine to be defective in materials or workmanship, free of charge. If the product fails, the buyer must contact Mud-Skipper for an RMA prior to returning the product. Failed parts must be returned for inspection. Shipping expenses for any item submitted for repair or replacement under this warranty are the responsibility of the owner of the item. Mud-Skipper will provide return shipping of the repaired or replaced part to the customer via UPS, USPS parcel post, or other freight carrier of our choice (additional charges for expedited return shipping to the buyer is the responsibility of the buyer). This warranty does not cover damage due to impact, normal wear, excessive wear to the shaft or shaft bushings due to lack of lubrication, neglect, corrosion, lack of maintenance, modification to the product, or misuse. The customer will be responsible for the shipping costs of any item returned to them that is not covered under warranty. This warranty is provided to the original purchaser. Proof of original purchase is required on all warranties, exchanges, and returns. Electrical parts ARE covered under this warranty. Propellers ARE NOT covered under this warranty.
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
Buy now and save!
Tell a friend
Watch now
Postage info
Click the Postage tab above the listing description for more info
Click the Postage tab above the listing description for more info!
Additional delivery notes
PICK UP OPTION
Sorry, our items are NOT available for pick-up.
PAYING VIA PAYPAL
We accept PayPal on our all our items so you can shop with confidence.
Simple choose the PayPal option when proceeding through the checkout.
Additional Information
No additional information at this time
Ask seller a question
Contact
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask seller a question
© Mud-Skipper
Postage
Click the Postage tab above the listing description for more info
Payment
Accepted Payment Methods
PayPal
Returns
Returns are accepted
Items must be returned within 30 days of the auction ending
Buyer will pay for return shipping.
eBay integration
by